Informace o publikaci
Microstructural changes of amorphous Mo–B–C coatings upon thermal annealing
| Autoři | |
|---|---|
| Rok publikování | 2019 |
| Druh | Článek v odborném periodiku |
| Časopis / Zdroj | Surface & coatings technology |
| Fakulta / Pracoviště MU | |
| Citace | |
| www | https://www.sciencedirect.com/science/article/pii/S0257897219310436 |
| Doi | http://dx.doi.org/10.1016/j.surfcoat.2019.125052 |
| Klíčová slova | Magnetron sputtering; Thermal stability; Mo–B–C coatings; Mo2BC; Mo2C |
| Popis | Several amorphous Mo–B–C coatings with wide range of compositions were subjected to thermal annealing to a final temperature of 1000 °C in UHV conditions. The nature of the induced recrystallization depended mostly on the Mo content in the coating. A higher Mo content resulted in a nanocrystalline Mo2C phase, a lower Mo content in a nanocrystalline Mo2BC phase and Mo content in-between resulted only in a near-amorphous microstructure. In all cases, the hardness and effective elastic modulus increased significantly after annealing up to values of 29 GPa and 500 GPa, respectively. The cobalt diffusion from the WC-Co substrates affected the lower parts of coatings forming a MoCoB interface. |
| Související projekty: |
|